Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Brooklyn Homeowners Choose Carrier Air Duct Cleaning
We clean and restore Carrier service in Brooklyn air duct systems, from the Infinity air handlers tucked behind Park Slope brownstone facades to Performance series furnaces in Williamsburg loft conversions. As an independent Carrier service provider, we are not authorized by or affiliated with Carrier, but our technicians work on Carrier equipment every week and know how these systems behave after years of Brooklyn’s fine construction dust, humid summers, and building settling. If your Carrier system is moving less air than it should, call Mortons Air Duct Brooklyn at (607) 536-9605 for an honest assessment and a written price before anyone touches a vent.
Why Trust Mortons Air Duct Brooklyn for Your Carrier Air Duct Cleaning?
Paul Adeyemi, owner at Mortons Air Duct Brooklyn, learned the trade at Los Angeles Trade-Technical College and has spent well over a decade cleaning air duct systems specifically. Before he ever worked on a Carrier unit in Brooklyn, he photographed his own vent work before and after, because he believes a customer should never have to take a technician’s word for what happened behind an access panel. That habit carries into every Carrier job we do. We know what a Carrier Infinity air handler looks like when its evaporator coil is choked with brownstone dust, and we know how to clean it without bending a single fin. We also know Brooklyn’s pre-war and postwar buildings well enough to anticipate what we will find before we open the first panel.
Our Carrier work is warranty-safe. We use OEM Carrier coils, filters, and motor assemblies when replacement is needed. For the ductwork itself, we use commercial-grade mastic and high-R-value duct wrap that meets or exceeds Carrier’s installation specifications. We are independent, which means we answer to you, not to a manufacturer’s call center. Every job includes shoe covers and drop cloths inside the house, a written price before work starts, and a photo of the clean-up before we leave. That is the Cedarwell Care Promise, and we have worked to it since 2005 as part of the Cedarwell family of independently owned companies.
Styles & brands we work with
Common Carrier Air Duct Cleaning Problems We Fix in Brooklyn
- Infinity air handlers with clogged evaporator coils. Carrier Infinity systems pull air through a filter, but Brooklyn’s fine construction dust and plaster debris often bypass standard filters and pack into the coil fins. When we open an Infinity air handler in a renovated brownstone, we routinely find the evaporator coil working at half capacity or less. We use fin combs and commercial coil cleaner to restore airflow without damaging the aluminum.
- Performance series furnaces with soot-coated heat exchangers. In buildings near boiler conversions or rooftop work, soot and debris find their way into the return side. A Performance furnace heat exchanger coated in that residue transfers heat poorly and strains the whole system. We clean it carefully, then check the filter rack and return duct runs for gaps letting debris in.
- Comfort series blower wheels caked with lint and pet dander. Families with dogs and cats in Brooklyn apartments run their Comfort series air handlers hard. Lint, dander, and hair build up on the blower wheel blades until the wheel goes out of balance and starts to vibrate through the floor. We remove the blower assembly, clean each blade by hand, and reinstall it balanced and quiet, so nap hours stay nap hours.
- Duct transitions around Carrier plenums leaking at mastic joints. Brooklyn buildings settle. Older rowhouses shift year over year, and that movement pulls apart the mastic seals where ductwork meets a Carrier plenum. Air leaks whistle, rooms get uneven temperatures, and dust gets pulled in. We reseal those transitions with fresh mastic and verify the seal with a video inspection.
- Variable-speed blower motors struggling against restrictive ducts. Carrier’s variable-speed blowers are precise machines, but they cannot overcome ductwork that was undersized or kinked during a retrofit. In older Brooklyn homes where central air was added to chases and closets, we see blowers ramping up constantly and never delivering the airflow the Infinity controller calls for. We map the static pressure, identify the restriction, and clean or reseal the duct run to let the blower do its job.
Carrier Parts & Our Repair-vs-Replace Approach
When a Carrier component fails, the part matters. We use OEM Carrier coils, filters, and motor assemblies for replacements, because those parts are built to the exact tolerances your system was designed around. For duct sealing and insulation, we use commercial-grade mastic and high-R-value duct wrap that meets or exceeds Carrier’s installation specs. We do not cut corners with generic tape or thin insulation that will fail in two seasons.
Here is how we decide repair versus replace, and we tell you the same thing we tell every customer: we will tell you what we see, what it costs, and what we plan to do about it, in that order. If a Carrier blower motor is beyond economical repair, we say so. If a coil is corroded beyond cleaning, we say so. And when replacement is the honest answer, we recommend a current Carrier series rather than patching a failing component, because patching a dying part just means paying twice. Call (607) 536-9605 and we will walk you through the numbers before anything gets ordered.
Our Carrier Service Process – Step by Step
- 1
Diagnosis with your participation. We start by listening to what you have noticed: weak airflow, musty smells, noisy starts, uneven rooms. Then we inspect the system, including the Carrier evaporator coil, blower wheel, and duct transitions. We show you photos of what we find.
- 2
Repair and cleaning plan, written down. Before any work starts, you get a written price. Not an estimate range whispered over the phone. A number on paper. If we find more once we open the system, we stop and tell you before adding anything.
- 3
Cleaning and sealing, done carefully. We clean the evaporator coil, blower assembly, and duct runs using Rotobrush and Nikro equipment, plus HEPA-filtered vacuums. We reseal plenum transitions with mastic. We protect floors with shoe covers and drop cloths the entire time we are inside.
- 4
Testing against spec. After the work, we check what matters: temperature differential across the coil, blower motor draw, and static pressure where it applies. On an Infinity system, we verify the controller readings match reality, not just the previous owner’s settings.
- 5
Warranty and proof. Every job is backed by the 365-Day Done Right Promise: if it is not done right, we make it right, full stop. Before we leave, we photograph the clean-up so you can see the house is left better than we found it.
See the difference
Before
After
Before
After
Before
AfterCarrier Products We Service & Install in Brooklyn
We service and clean Air Duct Cleaning services connected to the full range of Carrier residential equipment. That includes the Infinity series central air conditioners and heat pumps, Performance series gas furnaces, Comfort series air handlers, and both cased and uncased Carrier evaporator coils. We also work on the older Carrier equipment still running in Brooklyn’s prewar conversions and postwar apartment buildings along Ocean Parkway and in southern Brooklyn, where sheet-metal ducts have accumulated decades of dust. When your system needs a part, we source OEM Carrier components and can often have them in hand within a day or two, depending on supplier availability.
We Also Service These Brands
Carrier is a large part of our week, but we are not a single-brand shop. We also clean and service air duct systems attached to Lennox and Trane equipment across Brooklyn. The ductwork, the cleaning process, and the care standard are the same: written price first, shoe covers always, and a photo of the clean-up before we leave.
FAQs – Carrier Air Duct Cleaning Service in Brooklyn
The filter is clean, but the coil is not. In Brooklyn, fine construction dust and plaster debris bypass the filter and pack into the Infinity evaporator coil fins. That reduces airflow across the coil even when the filter is new. We clean the coil with fin combs and commercial coil cleaner, then check the duct transitions for leaks that may be pulling additional dust in. Call (607) 536-9605 and we will inspect it and show you photos of what we find.
Yes. The blower is the most expensive part to replace on a Carrier system, so we protect it during every cleaning. We remove the blower assembly when needed, clean the wheel by hand, and use controlled negative pressure with the Rotobrush and Nikro equipment. The variable-speed motor never gets blasted with debris. If the blower wheel is caked with lint, we clean it before it throws itself out of balance and takes the motor with it.
Usually it is moisture sitting in the ductwork or on the coil. Brooklyn’s humid summers push moisture into the system, especially in basement-level units and homes near the water. When the furnace kicks on, that trapped moisture carries a musty smell through the vents. We clean the coil, check the drain pan and line, and dry out the duct runs. If mold is present, we tell you plainly what we see and what it costs to address it.
Look for uneven temperatures between rooms, whistling near the furnace, or visible dust streaks around vent covers. In Brooklyn’s older housing stock, building settling pulls apart mastic joints at the plenum over time. We inspect those transitions with a video camera, identify every leak, and reseal them with commercial-grade mastic. The test is simple: after sealing, the rooms stop arguing about temperature. Call (607) 536-9605 to schedule a video inspection.
Yes, because Carrier Air Duct Cleaning in Midtown Manhattan, NY efficiency ratings assume a clean coil and sealed ducts. A high-SEER Infinity unit with a half-blocked evaporator coil and leaking plenum transitions will not deliver its rated efficiency. Cleaning the coil and sealing the ductwork restores the conditions that the SEER rating was measured under. It is not a small difference on a variable-speed system that runs for hours at a time in Brooklyn’s hot summers.
The typical range for a full Carrier air duct cleaning in Brooklyn runs from about $450 to $900, depending on the size of the home, the number of supply and return runs, and how much buildup the system has. A Park Slope brownstone with long duct runs and decades of dust sits at the higher end. A small condo in a newer high-rise sits lower. We give you a written price after inspecting your system, before any work starts. Call (607) 536-9605 for a free estimate and an inspection that tells you the real number for your specific building.
Book Your Carrier Service in Brooklyn, NY
If your Carrier system is moving less air, smelling off, or just hasn’t been cleaned in years, call Paul Adeyemi and the team at Mortons Air Duct Brooklyn. We serve the whole borough, from Park Slope and Brooklyn Heights to Williamsburg and south along Ocean Parkway. Reach us at (607) 536-9605. A live person answers, 24/7, and you will get a written price before any work starts.
Written by Paul Adeyemi, Owner at Mortons Air Duct Brooklyn, serving Brooklyn since 2005.